Product Center
ZKXQ-1 Vacuum Mounting Press
Introduction:
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. ZKXQ-1 vacuum mounting press has a compact design, large capacity, simple and fast operation, and high reliability. The built-in vacuum pump can quickly and effectively evacuate, suitable for vacuum cold mounting of epoxy resin. It can effectively remove bubbles in the sample and resin, allowing the resin to penetrate into the pores and cracks of the sample, obtaining a sample without bubbles and pores, and improving the final mounting effect of the sample. It is very suitable for porous materials, such as the preparation of failure analysis specimens for cracks, porous castings, and composite materials, and electronic components, rock minerals, ceramics, etc.
Features:
- Built in low-noise vacuum pump, fast vacuuming speed, high vacuum degree.
- Fully transparent large vacuum chamber, capable of accommodating up to 12 samples (Ф40mm).
- Electric rotary table, manual knob pouring, convenient and fast.
- Program control, capable of setting vacuum degree, number of cycles and corresponding time, automatically completing the entire mounting process of multiple samples vacuuming, maintaining vacuum, and venting cycles.
- According to different materials and samples, 80 sets of process parameters can be saved and called up.
Technical Parameters:
|
Model |
ZKXQ-1 |
|
Vacuum Degree |
0~-75kPa, Vacuum Pump 0~-90kPa |
|
Default Vacuum Degree |
-70kPa |
|
Vacuum Flow |
10~20L/min |
|
Vacuum Chamber Dimensions |
Φ250mm×85mm, accommodating up to 12 samples (Ф40mm) |
|
Work Disc Control |
Button jog, Clockwise and counterclockwise rotating |
|
Operation |
7 inch touch screen, Manual knob pouring |
|
Timing Cycle |
0~99min, Automatic vacuuming /venting, Automatic circulation |
|
Max. Number of Cycles |
99 |
|
Program |
80 groups |
|
Power Supply |
220V, 50Hz，10A |
|
Dimensions |
462×400×310mm |
|
Net Weight |
24kg |
Packing List:
|
Name |
Specification |
Qty |
|
Machine Body |
|
1 set |
|
Large Cushion Plate |
|
1 pc |
|
Cold Mounting Mould |
25/30/40mm |
5 pcs |
|
Epoxy Cold Mounting Set |
Resin 500ml+Liquid 250ml |
1 set |
|
Disposable Pouring Connector |
|
5 pcs |
|
Disposable Paper Cup |
|
5 pcs |
|
Stirring Rod |
|
5 pcs |
|
Oil Paper |
|
5 pcs |
|
Usage Instruction Manual |
|
1 copy |
Related products
QR code
Shanghai Metallurgical Equipment Company Ltd.
Add：No.373 Fengwang Road, Fengcheng Economic Park,Fengxian District, Shanghai 201411, China
Tel: +86 21 57510133 ; +86 13681885644
Fax: +86 21 66240692
Email: shshangcai@163.com
